Price to determine what is wrong with a firearm. This usually involves test firing, cleaning, inspecting, and test firing again. Once completed you will receive an estimate for the repair. Sometimes a good cleaning fixes the problem.
$65Safety Check. Inspect to make sure firearm is safe to fire. Check headspace and insure that all safeties function as intended. Check trigger pull for safe limit.
$65Field Strip, clean, oil, and assemble. This is an operator level cleaning done per the manufacturers recommendations.
$65Basic cleaning & Safety Check
$95Complete disassembly of major parts. Ultrasonic clean and oil bath all metal and polymer parts. Hand clean items that cannot be run through ultrasonic baths such as wooden stocks, grips, and some aluminum frames. Clean bore to bare metal. Insure all screws are properly torqued.
$150Zero scope using a sighting laser and a software created a sight in target for a designated load and zero distance. Includes printed ballistics curve.
$45Align rings, set eye relief, level scope, torque and lock tight screws. Bore sight to customer specified load and range and provide ballistic print out.
$125Inspect the bore of your barrel using shop borescope. The only way to really know what condition it's in. Do it a pickup or drop off.
$25Complete disassembly of major parts. Ultrasonic clean and oil bath all metal and polymer parts. Hand clean items that cannot be run through ultrasonic baths such as wooden stocks, grips, and some aluminum frames. Clean bore to bare metal. Insure all screws are properly torqued. Perform Safety inspection.
$175Engrave a receiver with customers name or trust to comply with NFA requirements.
$110Remove existing muzzle device (add $25 if it is pinned). Clean threads, time and thread lock new muzzle device to barrel. Drill a hole 0.50” into barrel, seat a 3/32” dia. pin and weld over top. Dress weld and touch up finish ($99 for a 1 business day turn around).
$75Pin Stock to make MA.Compliant. Price depends on the stock. Will discuss options including a tool required option. Price ranges from $45 to $150
$45Labor to make a non-compliant Semi-Auto rifle or carbine compliant with the existing Massachusetts assault weapons ban. Remove bayonet lug and touch up finishing. Pin adjustable or folding stock to make fixed. Remove flash suppressor and install a muzzle brake. Add $49 if you’d like us to provide the muzzle brake. We use the CMMG Compensator SV Brake.
$150Ultrasonic clean and oil bath bolt and carrier assembly. Remove all carbon and fouling. Grease lugs. Clean bore of all fouling. Rest of weapon wiped down and lubed as required.
$75Field strip to major components. Ultrasonic clean and oil bath of all parts including stocks. Remove all carbon and fouling from bolt, carrier and barrel extension. Grease lugs. Clean bore to bare metal and lube. Makes gun look like new!
$125Ultrasonic clean and inspect bolt. Clean and inspect gas port, gas block, and gas key. Replace and align gas tube. Replace gas rings with helical ring. Inspect gas key for alignment and tighten or re-stake as required.
$75Polish M4 feed ramps and barrel extension lug recesses. The Barrel MUST be removed from the Upper receiver for this Service to be performed. Add $25 if M4 feed ramps need to be cut and reamed.
$125Improves extraction and ejection especially under harsh conditions or when excessive fouling occurs. Ultrasonic clean bolt carrier assembly. Deburr firing pin and ejector holes. Contour and polish extractor and ejector. Reassemble with BCM Extractor/Ejector upgrade kit* which includes: BCM Extractor Spring (chrome silicon, heat treated & stress relieved, shot peened) Crane Ind O-Ring (Mil-Spec) Black Extractor Insert * (Extractor NOT INCLUDED)
$75Work includes performing several proprietary alingment, deburring, and polishing operations to improve overall reliability under harsh condistions. Components that receive attention include: Hammer, bolt carrier, firing pin, firing pin hole, cam pin, and others. Operator will notice reduced hammer/carrier drag which reduces short stroking probability if lube is thin/absent or when heavy fouling occurs. NOTE: This service can only be performed with fully shrouded (M16) bolt carriers and rounded hammers only. If you have a notched hammer, we can install a Milspec rounded hammer for $25. If you have an un-shrouded Bolt Carrier we can provide a fully shrouded carrier for $95.
$75Reliability packages #1, #2, & #3 performed in one service. Modifications lead to a CLEANER and more reliable AR15. The Polished areas are NOT prone to rust, the polished surface seals the metal extremely well and metal heat treat/hardness is NOT affected.
$220All three reliability groups plus the Gas Overhaul service.
$280Remove barrel from receiver. Single point cut threads on a lathe concentric to the BARREL, 0.600” to shoulder. Test fit muzzle device or thread protector if supplied. Add $50 to include a pin and weld to this service.
$110Thread barrel for muzzle brake and pin and weld a muzzle brake to barrel. Price depends on effort to remove rail system and if a pinned muzzle device needs to be removed. $160-$260
$160Remove barrel from receiver. Single point cut threads on a lathe concentric to the BORE, 0.600” to shoulder. Test fit muzzle device or suppressor and gauge for alignment. Add $50 to include a pin and weld to this service.
$225Remove existing rail/handguard and barrel. Replace with customer furnished barrel, rail, gas block, or handguard.
$75Remove and reattached a Front Sight Base or gas block. Price depends on effort to remove rail system and if a pinned muzzle device needs to be removed. Add $125 if drilling and cross pinning. $85 – $135
$85Remove existing rail/handguard and replace with customer furnished rail or handguard. Price depends on effort to remove rail system and if a pinned muzzle device needs to be removed. $50-$200
$50Grind off lug and touch up finish for factory look.
$55Remove a muzzle device that has been pinned and welded to barrel.
$50Remove existing sights, clean dovetails, install new customer supplied sights using thread lock. Please wait 24 hrs. before firing weapon. ($65 if done by while you wait appointment)
$45Field Strip Clean Oil & Assemble
$45Ultrasonic cleaning and oil bath. Bronze brush clean bore to bare metal.
$75Field strip and inspect for any visible damage or excessive wear. Insure safeties are functional and trigger pull is within safe limits. Test fire. Please provide 10 rounds of factory ammunition.
$65Field Strip Clean Oil and inspect for any visible damage or excessive wear. Insure safeties are functional and trigger pull is within safe limits. Test fire. Please provide 10 rounds of factory ammunition.
$75Ultrasonic cleaning and oil bath. Bronze brush clean bore to bare metal. Inspect for any visible damage or excessive wear. Insure safeties are functional and trigger pull is within safe limits. Test fire. Please provide 10 rounds of factory ammunition.
$99High polish all feeding components and surfaces. Test fire
$65Traditional gunsmith method Stone and polish sear and hammer notch to lighten and smooth trigger pull. Removes any creep or grittiness.
$150Field Strip Clean Oil & Assemble
$65Ultrasonic cleaning and oil bath all metal parts. Hand clean any wood or plastic parts. Bronze brush clean bore to bare metal.
$95Attach rings and scope. Thread lock and torque screws. Set eye relief, level, and laser bore sight.
$99Cost to drill and tap a single hole. $35 ea. additional hole.
$65Drill and tap up to (4) holes then mount a scope base or rail. Attach rings and scope. Thread lock and torque screws. Set eye relief, level, and laser bore sight. Additional cost may apply to hardened receivers or side mounting.
$269Measure head space using GO & NO GO gauges.
$45Disassemble and reassemble a firearm before and after Cerakote. Additional cost may be involved for some models.
$65Cerakote a single part
$85Cerakote Stripped Handgun Slide or Frame. Etch all parts with AO, apply oven cure coating and cure. Add for disassembly/reassembly.
$85Add an additional color to any Cerakote project.
$35Cerakote an AR style Rifles, new using a single color and up to 12 parts. Add if assembly/reassembly is required.
$250Cerakote a stripped upper and lower receiver set in a single color. Add for disassemble/re-assemble)
$150Cerakote an AR style rail or handguard using a single color. Add if assembly/reassembly is required.
$85Cerakote an AR style upper or lower using a single color.
$85Cerakote a stripped handgun in a single color. Frame, slide, and up to 6 small parts. Add for disassembly/reassembly.
$225Cerakote a stripped revolver in a single color. Frame, cylinder and up to 6 small parts. Add for disassembly/reassembly.
$225Prep and Cerakote a bolt action style rifle, using a single color. Barrelled action, stock and up to 5 parts. Add for disassembly/reassembly.
$195Cerakote Barreled action in a single color. Add for disassembly/reassembly.
$125Prep and Cerakote a shotgun, using a single color. Barrel, action, stock and up to 5 parts. Add for disassembly/reassembly.
$225Cerakote a batch of disassembled small parts in a single color. 1-5 $85, 6-10 $150, 10-15 $200
$85Cerakote Stencils: Application Layout Removal starting $75
$75
